Category Archives: News

YAMAHA TENERE 700 19

Add to the application list new suspensions products to improve the setting of the adventure bike Tenere 700.

On front side, available the adventure “Quad Valve” F25RX (25 mm cartridge) that allow a fully adjustment (Compression-Rebound-Preload),

replacing all the original internal fork parts.

Ready to fit, without any modification to the original fork.

On rear side, available the multiadjustable hydraulic rear-hock series M46R, M46K andp also the entry level M46KD, equipped with Knob-Hydraulic Spring Preload unit,

for easy and fast setting change.

Adjustments: Compression, Rebound, Length, Preload.

DATA SHEET

Honda NC 750D Integra my 16-19

For the Integra 750 the last suspension products up-date for better comfort and performance.

 

Multiadjustable rear monoshock type M46KF and M46KD.

Easy spring preload adjustment by the Flex-Knob hydraulic option.

 

Front fork kit type FKE as entry-level option and the innovative F15K “quad valve system” fully adjustable 20 mm hydraulic cartridge.

Ready to fit, no modification to the original fork is required, spring rate supplied on the base of driver weight.

 

DATA SHEET

MOTO GUZZI Eldorado 1400 my 17-20

Available a complete range of specific products developped for a better handling and comfort.

 

Rear twin set:

– the top level M40KC fully adjustable in Compression, Rebound and Preload.

– the base level M40D adjustable in Rebound and Preload.

All available in the Black or Chrome options.

 

Front side:

– the performance of the “Quad Valve System” F15K, 20 mm hydraulic cartridge that allow a fully adjustment of Compression, Rebound and Spring Preload.

Ready to fit “plug & play”, it replaces all the original internal fork parts.

Fully reversible and no modification to the original fork is required for assembly.

 

Also available the entry level FKE fork spring kit, supplied with a fork cap unit that allows the spring preload.

 

DATA SHEET

BMW R1200R my 15/18 & R1250R my 19

For the BMW Roadster now available a full range to upgrade the front and rear suspensions.

 

Multiadjustable rear shocks series M46K & M46KD, equipped with Standard or Hydraulic spring preload by knob system.

As usually the shock is also available on “Dark” version.

On front side, a complete range of hydraulic cartridges is offered:

> F25R (the “classic” 25 mm hydraulic cartridge)

> F20K (the 20 mm “quad valve system” cartridge)

Both allow a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts.

Ready to fit (plug&play), without any modification to the original fork.

To complete the offer, is available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce shaking of the front wheel and provide greater safety at high speed. It will fit on the original supports.

 

DATA SHEET

SUZUKI GSX-S 1000 Katana my 19

For the “legendary name” new Katana 1000 added on pricelist specific products to improve the handling and performance.

The rear suspension options are fully adjustable.

Three options: the base line M40KD, the med line M46K and the top line M46R.

Orange spring as standard and Black spring on the Dark version, to optimize the bike look.

For the front fork, are developped the cheaper entry-level FKS & FRK spring & hydraulic kits and three options of fully adjustable hydraulic cartridge kits to allow a greater setting.

– F20K the 20 mm quad-valve-system cartridge.

– F25R the update 25 mm classic hydraulic cartridge.

– F25SA the 25 mm sealed hydraulic cartidge.

All the fork kits are fully reversible and no modification to the original fork is required for assembly.

DATA SHEET

MOTO GUZZI V85 TT my 19

To improve the setting of the Guzzi’s crossover, added to our application-list specific products for front and rear suspensions.
On front side, available the “Quad Valve” F20K hydraulic cartridge that allow a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts.
Ready to fit, without any modification to the original fork.
Also available the entry level (FKS) fork spring kit & (FRK) hydraulic kit.
On rear side, available the multiadjustable hydraulic rear-hock series M46R & M46K, also equipped with Knob-Hydraulic Spring Preload unit, for easy and fast setting change.
Adjustments: Compression, Rebound, Length, Preload.

DATA SHEET

DUCATI HYPERMOTARD 950 my 19

To up-grade the suspension setting of the new my 2019 Hypermotard, now available new products for front and rear suspensions.

Multiadjustable hydraulic rear-hock series M46KD also equipped with “IK” Knob-Hydraulic Spring Preload unit, for easy and fast preload setting.

For the front fork, available two hydraulic cartridge kits:
– the standard “Quad Valve” F20K (ID 20 mm)
– the adventure “Quad Valve” F12RX (ID 25 mm)

The hydraulic cartridges allow a fully adjustment Compression, Rebound, Preload), replacing all the original internal fork parts.
All the fork kits are ready to fit (Plug & Play), without any modification to the original fork.

Also suggested the range of SDK & SDR steering damper kit, to reduce shaking of the front wheel and greater safety at high speed.

DATA SHEET

TRIUMPH Bonneville Speedmaster 1200 my 18

Available specific products for a better handling and comfort of the Speedmaster 1200.
Rear shock series M40D Black&Black, adjustable in Rebound and Preload.
On front side, the performance of the “Quad Valve” F15K (ID 20 mm cartridge) that allow a fully adjustment on Compression, Rebound and Spring Preload.
It replaces all the original internal fork parts and is ready to fit, fully reversible and no modification to the original fork is required for assembly.
Ready to fit and available with specific spring rate in relation to the driver weigth for a perfect setting.

PRODUCTS

TRIUMPH Bonneville Speed Twin 1200 my 2019

For the newest Speed Twin 1200 of the Bonneville family, available a complete range of specific products for a better handling and comfort.

Rear twin set: the top level M40KC (fully adjustable in Compression, Rebound, Length and Preload) and the base level M40D (adjustable in Rebound, Length and Preload) all available in the Black&Black or Black&Crome options to optimize the look of the bike.

On front side, the performance of the “Quad Valve” F15K (ID 20 mm cartridge) that allows a fully adjustment on Compression, Rebound and Spring Preload.
It is ready to fit “plug&play” and replaces all the original internal fork parts. Fully reversible and no modification to the original fork is required for assembly.

Also available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce shaking of the front wheel and provide greater safety at high speed.

 

DATA SHEET

Kawasaki Versys-X 300 my 17/19

For a best up-grade of the small adventure bike Versys-X, now listed specific products for front and rear suspensions.

rear side:
Multiadjustable hydraulic rear-shock type M46K & M46KD, also equipped with Hydraulic Spring Preload unit, for an easy and fast setting change.
The Dark Series is available on demand.

front side:
The entry-level fork kit series FKE & FSE with spring preload adjustment, easy and ready to fit. No modification are required to the original fork.

Data sheet

Suzuki SV 650X my 18/19

Special products to upgrade your Sport Caferacer SV 650X.

Multi-adjustable rear shocks type M46KF & M46KD, equipped with Standard or Hydraulic spring preload.

Ready to fit front fork kits type FKE & FSE or the “plug&play” quad-valve system full adjustable hydrualic cartridge F15K that replaces all original fork internals, allowing a complete control on Reboun, Compression and Prerload.

 

DATA SHEET

HONDA CB 650R my 2019

For the sport-cafe bike CB 650R new specific suspensions products are available.

On front side, a complete range of fork kit is offered:
> F15K (the full adjustable “quad valve” hydraulic cartridge)
> FRK (the hydraulic set kit)
> FKS (the spring kit)

All are ready to fit without any modification to the original fork.
Dedicated spring rates, based on the driver weight, are available.

On rear side:
Multiadjustable rear shocks series M46K & M46KD, equipped with Standard or Hydraulic spring preload, also by flex-knob system. The “Dark” version is available on demand.

 

DATA SHEET

KAWASAKI ZX 636R my 19

For a complete up-grade of the sport-bike ZX636R, developped and added to the pricelist a new and specific range of products for front and rear suspensions. Multiadjustable hydraulic rear-hocks series M46KD, M46K and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change. Front fork kit series F25SA (the newest innovative sealed hydraulic cartridge) & type F12R (standard hydraulic cartridge) adjustable on Compression, Rebound and Spring Preload, that replace all the original internal fork parts. Also available the first step entry-level hydraulic fork kit series FRK-BP. All the fork kits are ready to fit, without any modification to the original fork. Also available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce for greater safety at high speed.

Data Sheet

Ducati Panigale V4 1100 18-19

For this supersport bike new specific products available.

On front side, the fork kit series F25SA (the newest innovative sealed hydraulic cartridge) & type F12R (standard hydraulic cartridge) adjustable on Compression, Rebound and Spring Preload, that replace all the original internal fork parts.
Also available the first step entry-level hydraulic fork kit series FRK-BP.
Ready to fit, without any modification to the original fork.

Also available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce shaking of the front wheel and provide greater safety at high speed.
It will fit on the original supports.

On rear side, available the multiadjustable hydraulic rear-hock series M46R & M46K, equipped with Standard or incorporated Hydraulic spring preload.
Adjustments: Compression, Rebound, Length, Preload.

All products with dedicated setting and spring-rate, based on the driver weight.

 

Scheda tecnica

BMW G 310R m.y.16/18

For a complete up-grade of the small BMW, developped and added to the pricelist a new and specific range of products for front and rear suspensions..

Multiadjustable hydraulic rear-hocks series M46KD, M46K and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change.

For the front fork, available the new “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit and FRK hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork.

DATA SHEET

Triumph Bonneville BobberBlack 1200 18

For the Black version of the Bobber family, available specific products for a better handling and comfort.

Rear shock series M40D available in the Black&Black, Black&Crome, Black&Orange options to optimize the look of the bike.

On front side, the performance of the “Quad Valve” F20K (ID 20 mm cartridge) that allow a fully adjustment on Compression, Rebound and Spring Preload).
It replaces all the original internal fork parts and is ready to fit, fully reversible and no modification to the original fork is required for assembly.

Data sheet

KTM 1290 SuperDukeR 17-18

To improve the setting of the KTM big naked 1290, available a compete range of suspension products for front and rear.

On front side, available the adventure “Quad Valve” F12RX (ID 25 mm cartridge) that allow a fully adjustment (Compression-Rebound-Preload),
replacing all the original internal fork parts.
Ready to fit, without any modification to the original fork.

For sport riders, also available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce shaking of the front wheel
and provide greater safety at high speed.
It will fit on the original supports.

On rear side, available the multiadjustable hydraulic rear-hock series M46K, also equipped with Knob-Hydraulic Spring Preload unit, for easy and fast setting change.
Adjustments: Compression, Rebound, Length, Preload.

 

Data sheet

SUZUKI DL 650 V-Strom my 17-18

For a best up-grade of the adventure VStrom 650, now available new and specific products for front and rear suspensions.

Multiadjustable hydraulic rear-shock series M46KD & M46KF, also equipped with Hydraulic Spring Preload unit, for easy and fast setting change.

For the front fork, available the “Quad Valve” F15K (diam.20 cartridge) that allows a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts and the entry-level fork kit series FKE & FSE with spring preload adjustment.

All the fork kits are ready to fit, without any modification to the original fork.

Data sheet

HONDA CB 1000R my 18

For the new sport-naked bike CB 1000R have been developed specific suspensions products.

Multiadjustable rear shocks series M46KD & M46KF, equipped with Standard or Hydraulic spring preload by flex-knob system.

The “Dark” version also available on demand.

On front side, a complete range of hydraulic cartridges is offered:

> F25SA (the “closed” hydraulic cartridge)

> F12R (the “classic” hydraulic cartridge)

> F20K (the newest “quad valve system” cartridge)

All  allow a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts.

Ready to fit (plug&play), without any modification to the original fork.

Also available the “entry-level” hydraulic fork kits FRK-BP to improve performance of the original SFF fork.

Dedicated spring rates, based on the driver weight, are available.

DATA SHEET

KTM Duke 790 my 2018

To improve the setting of the new twin naked 790 Duke, now available a compete range of suspension products for front and rear.

On fgront side, available the newest “Quad Valve” F20K (ID 20 mm cartridge) or the classic F12R (ID 25 mm cartridge).
Both allow a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts.
All the fork kits are ready to fit, without any modification to the original fork.

For sport riders, also available the fully adjustable “speed sensitive system” steering damper, type SDR & SDK, to reduce shaking of the front wheel and provide greater safety at high speed.
It will fit on the original supports.

On rear side, available the multiadjustable hydraulic rear-hock series M46KD, also equipped with Knob-Hydraulic Spring Preload unit, for easy and fast setting change.

DATA SHEET

TRIUMPH Street Triple 765 RS my 2017


Now available a range of products to improve handling and performance of the sport naked 765 RS. Adjustable and “speed-sensitive” steering damper kits series SDR & SDK to reduce shaking at high speed. Multiadjustable rear shocks series M46R & M46K, equipped with Standard or Hydraulic spring preload. The Shadow & Dark version also available. Front fork, series F25SA (the “closed” hydraulic cartridge) & F12R (the “classic” hydraulic cartridge). Both allow Compression, Rebound and Spring Preload adjustment. Also available the “entry-level” hydraulic fork kit FRK-BP to improve performance of the original BigPiston fork. Dedicated spring rates, based on the driver weight, are available.
DATA SHEET

DUCATI HYPERSTARDA 821 my 13/15 & 939 my 16/18

To up-grade the suspension setting of the HyperStrada, added to the pricelist new products for front and rear suspensions.

Multiadjustable hydraulic rear-hocks series M46K and M46R, equipped with “IK” Knob-Hydraulic Spring Preload unit, for easy and fast preload setting.

For the front fork, available the newest “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts.
Also available the cheaper FKS & FRK spring and hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork.

To reduce shaking of the front wheel and greater safety at high speed, the range of steering damper kits, type SDK & SDR.

DATA SHEET

KAWASAKI Ninja 400 my 18

For a complete up-grade of the small sport-bike, developped and added to the pricelist a new and specific range of products for front and rear suspensions.

Multiadjustable hydraulic rear-hocks series M46KD, M46K and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change.

Front fork kit type F15K, fully adjustable “Quad Valve” hydraulic cartridge and the easy entry-level FKE & FSE spring fork kits.
Dedicated setting and spring rates also available, to fit every driver weight.

All the fork kits are ready to fit, without any modification to the original fork.

 

DATA SHEET

DUCATI MULTISTRADA 950 my 17

For a best up-grade of the “entry level” of MTS family, now available new and specific products for front and rear suspensions.

Multiadjustable hydraulic rear-hock series M46K, equipped with Flex-Knob Hydraulic Spring Preload unit,
for easy and fast setting change.

For the front fork, available the new “Quad Valve” F20K (diam.20 cartridge) or the F12R-X (diam.25 cartridge), both allow a fully adjustment (Compression-Rebound-Preload), replacing all the original internal fork parts and the cheeper FRK fork spring & hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork.

Also available the steering damper application, type SDR & SDK for sport riders, to reduce shaking of the front wheel and provide greater safety at high speed.

DATA SHEET

KAWASAKI Z 900RS my 18

To improve handling and performance of the Modern Classic of Kawasaki, ready a complete range of suspension products.

Multiadjustable hydraulic rear-shock series M46KD & M46K-F also equipped with “Flex-Knob” Hydraulic Spring Preload unit, for easy setting adjustment.
The “Dark Series” rear shock is also available for a better look customization of your bike.

For the front fork, available the new “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit and FRK hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork and are 100% reversible.

SCHEDA TECNICA https://www.matrisdampers.com/en/prodotto/uncategorized/z900-rs-18/

BMW G 310R m.y.16/18

For a complete up-grade of the small BMW, developped and added to the pricelist a new and specific range of products for front and rear suspensions..

Multiadjustable hydraulic rear-hocks series M46KD, M46K and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change.

For the front fork, available the new “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit and FRK hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork.

DATA SHEET

DUCATI Scrambler 800 CafeRacer my 17

For the CafeRacer of Scrambler 800, now available a complete range of products to improve handling and performance.

Multiadjustable hydraulic rear-hock series M46KD & M46K-F equipped with “Flex-Knob” Hydraulic Spring Preload unit, for easy and fast setting change.
For a better look customization of your bike, also available the “Dark Series”.

For the front fork, available the new “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit and FRK hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork and are 100% reversible.

DATA SHEET

APRILIA DORSODURO 900 my 2017

For a best up-grade of the motard Aprilia, added to the pricelist new and specific products for front and rear suspensions..

Multiadjustable hydraulic rear-hocks series M46KD, M46K and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change.

For the front fork, available the new “Quad Valve” F20K, fully adjustale hydraulic cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit and FRK hydraulic kit.

All the fork kits are ready to fit, without any modification to the original fork.

 

DATA SHEET

APRILIA SHIVER 900 my 2017

To optimize the setting and the performance of the naked Aprilia, developped a specific range of suspension products.

Multiadjustable hydraulic rear shocks series M46KD, also equipped with incorporated Hydraulic Spring Preload unit.

For the front fork, now available the newest F20K, fully adjustale hydraulic “Quad Valve” cartridge fork kit and the classic FRK and FKS fork kits.
All the fork kits are ready to fit, without any modification to the original fork.

 

DATA SHEET

YAMAHA TDM 900 my 02/14

For a best up-grade of the “crossover” sprot-touring TDM 900, added to the pricelist new and specific products for front and rear suspensions..

Multiadjustable hydraulic rear-hocks series M46KD, M46k and M46R, equipped with incorporated Hydraulic Spring Preload unit, for easy and fast setting change.

For the front fork, available the “beat-seller” F15K, fully adjustale hydraulic “Quad Valve” cartridge, that allows a fully adjustment, replacing all the original internal fork parts and the cheaper FKS pring kit.

All the fork kits are ready to fit, without any modification to the original fork.

 

DATA SHEET

SUZUKI GSX 250R my 2017

To improve performance and set-up on the 250 Suzuki entry level sport bike, develpped suspension specific products.

Hydraulic multiadjustable rear-shock type M46KD & M46K, also equipped with Flex-Knob hydraulic spring preload, for easy and fast setting change.

Front fork kit type F15K, fully adjustable “Quad Valve” hydraulic cartridge and the easy FKE spring fork kit.
Dedicated setting and spring rates also available, to fit every driver weight.

All the fork kits are ready to fit, without any modification to the original fork.

DATA SHEET

HONDA CB 650F my 2017

To optimize the setting and the performance of the 650 Honda naked, now available specific suspension products.

Multiadjustable hydraulic rear shocks, series M46KD, M46K also equipped with Hydraulic Spring Preload adjuster.

Fully adjustale hydraulic cartridge fork kit series F15K and fork spring kit series FKE and FSE, all ones ready to fit without any modification to the original fork.

DATA SHEET

MotoGuzzi V7 Stornello m.y. 15/16

Specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better handling and performance.

Multiadjustable rear twin-shocks, series M40D & M40KC, allowing Rebound, Compression, Length and SpringPreload adjustment.

Front fork kit, series FKE and the innovative F15K hydraulic cartridge, multiadjustable on Compression-Rebound-Preload.
No modification to the original fork is required to assemble the fork kits.

DATA SHEET

HONDA VFR 800F my 14/16 & 17

Product upgrade for the sport-touring VFR 800F (RC79) my 14/16 & (RC93) my 17.

Specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better handling and performance.
Multiadjustable rear monoshocks series M46KD & M46KF, allowing Compression, Rebound, Length and (“flex-knob” hydraulic) SpringPreload adjustment.

Front fork kit, series FKS & FRK and the innovative F15K hydraulic cartridge, multiadjustable on Compression-Rebound-Preload.
No modification to the original fork is required to assemble the fork kits.

DATA SHEET

Kymco AK 550 my 2017

For the maxi-scooter, a complete and specific range of products is available to customize and improve setting and ferformance.

Rear shock, series M46KD & M46K multi-adjustable on Compression, Rebound, Length and SpringPreload (also available hydraulic preload option).

Front fork kit type F20K, hydraulic cartridge (Rebound aaj.).
No modification to the original fork is required to assemble the fork kit.

DATA SHEET

F43SP – UpSideDown 43 Front Fork

– Standard (Chromed)
– Gold (TIN treatment)
– FullBlack (DLC treatment)

Diameter 43 mm Chromed Steel inner tube.
On demand with PVD TIN treatment (Gold version) or DLC treatment (FullBlack version).

Outer tube made in Aluminium alloy with black oxidation treatment, available in diameter 50/54 or 50/55 mm.
Bottom fork machined from solid in Aluminium alloy with radial brake caliper 100 or 108 mm.

Adjustments: Compression, Rebound, Spring preload.
Damping by hydraulic sealed and pressurized cartridge system (F25 series) “Speed Sensitive System”.

SCHEDA TECNICA

F20K – fork cartridge kit (Quad Valve System)

Hydraulic fork cartridge kit that completely replace all the existing fork internals.
Fully-adjustable on Spring Preload, and on separate and asymmetrical Compression and Rebound functions to allow
an excellent upgrade of the original fork, offering to the rider a greater customization of the set-up.
Fork cartridge cylinder D.20 mm and Pumping rod D.12 mm in Aluminium alloy with anti-friction lapping and oxidation surface treatment.
Set of Compression and Rebound valves, machined from Aluminium billet, with its own dedicated shims stack for a total hydraulic flows control.
Anti-cavitation valve sets.

No modification to the original fork is required for assembly the fork kit and it is completely overhauled for a proper and regular maintenance.
All components of the cartridge are made of Aluminum alloy and subjected to anodizing surface treatment, with the objective to contain the weights and to ensure long-lasting wear.
Fork kit supplied with specific fluid.

Adjustments
– Spring preload (range 15 mm)
– Rebound (range 38 clicks)
– Compression (range 38 clicks)

Set of linear spring in Si-Cr alloy Steel, available in different rates,
specific for the different bike models and the driver weigth, for a total custom.

SCHEDA TECNICA

YAMAHA YZF R6 my 2017

Per la nuova supersportiva R6 sono stati inseriti a listino nuovi prodotti specifici.

Mono posteriori pluriregolabili – serie M46R & M46K – disponibili con precarico molla standard o idraulico integrato.

Kit cartuccia idraulica forcella serie F25SA (nuova cartuccia idraulica sigillata) & serie F12R (cartuccia idraulica standard) pluriregolabili in Compressione, Estensione e Precarico molla.

Tarature e molle dedicate in base al peso pilota.

 

SCHEDA TECNICA

MOTO GUZZI V7 III 17

Great possibility to customize the look and improve the performance, handling, comfort of the “classic” V7 of MotoGuzzi with the new specific products added to our pricelist.

Rear suspension sets, Twinshock series M40D & M40KC, multiadjustable in Compression, Rebound, Lenght SpringPreload.
The Twins are available in “Chrome” or “BlackEdition” version, to optimize the bike look.

Fork kit series FKE & FSE (the “entry level” range) and the “full adjustable” newest complete hydraulic cartridge series F15K, multiadjustable in Compression, Rebound, Spring Preload to convert the conventional non-adjustable orginal fork in a fully-adjustable fork, allowing a greater custom setting. Dedicated spring rates available on demand, based on the driver weight.
The fork kits are supplied “ready to fit” and do not require any modification to the original fork.

Data sheet

HONDA VFR 800X Crossrunner 15-17

Product upgrade for my 2015-2017 of the crossover Honda VFR 800X.
Specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better handling and performance.
Multiadjustable rear monoshocks, series M46KD, allowing Rebound, Length and (standard or “flex-knob” hydraulic) SpringPreload adjustment.

Front fork kit, series FKS & FRK and the innovative F15K hydraulic cartridge, multiadjustable on Compression-Rebound-Preload. No modification to the original fork is required to assemble the fork kits.

BMW R Nine T 1200 Urban G/S my 2017

To customize setting and performance of the BMW Urban G/S the “vintage enduro”, now available specific products.

Multiadjustable hydraulic rear shocks, series M46KD, M46K and M46R, also equipped with Hydraulic Spring Preload adjuster.Fully adjustale hydraulic cartridge fork kit series F15K and (the cheeper) FKE fork spring kit, all ready to fit without any modification to the original fork.

Adjustable and “speed-sensitive” steering damper kits, series SDK & SDR for sport riders, to reduce shaking and provide greater safety at high speed.

Ducati Scrambler 800 Desert Sled my 2017

Now available a range of products to improve handling and performance of the new Off-Road DesertSled.
Multiadjustable rear shock, series M46R, M46K & M46KD, equipped with Standard and Hydraulic spring preload.
The shocks are proposed also in Shadow & Dark version.
Front fork, series F12S (the fully adjustable hydraulic cartridge that allows Compression, Rebound and Spring Preload adjustment) & series FRK (the entry-level hydraulic and spring set kit).

Yamaha TMax 530 my 2017

For the leader of the maxi-scooter, a complete and specific range of products is available to customize and improve setting and ferformance
Rear shock, series M46KD & M46KF multi-adjustable on Compression, Rebound, Length and SpringPreload (also available hydraulic preload option).
Front fork kit type FKS & FRK and the F12S kit, multi-adjustable hydraulic cartridge (Compression-Rebound-Preload).
No modification to the original fork is required to assemble the fork kits.

TRIUMPH Street Triple 765R my 2017

Now available a range of products to improve handling and performance of the new naked 765R.

Adjustable and “speed-sensitive” steering damper kits, series SDK & SDR for sport riders, to reduce shaking at high speed.

Multiadjustable rear shock, series M46R & M46K,  equipped with Standard and Hydraulic spring preload.

The shocks are proposed also in Shadow & Dark version.

 

Front fork, series F25SA (the newest sealed hydraulic cartridge) & F12R (the standard hydraulic cartridge).

Both allow Compression, Rebound and Spring Preload adjustment.

Dedicated spring rates, based on the driver weight, are available.

Disponibili anche le versioni Shadow & Dark.

Kit cartuccia forcella, serie F25SA (nuova cartuccia idraulica sigillata) & F12R (cartuccia idraulica standard).

Pluriregolabili in Compressione, Estensione e Precarico molla.RK-BP.

Tarature e molle dedicate in base al peso pilota.

TRIUMPH SpeedTriple 1050S my 2016

For the sport naked SpeedTriple 1050S new specific products are available.

Adjustable and “speed-sensitive” steering damper kits, series SDK & SDR for sport riders, to reduce shaking and provide greater safety at high speed.

Multiadjustable rear shock – type M46R & M46K – equipped with Standard or Hydraulic spring preload.

Front fork kit: type F25SA, the newest innovative sealed hydraulic cartridge & type F12R, the standard hydraulic cartridge.

Both allow Compression, Rebound and Spring Preload adjustment.

Also available the first step entry-level hydraulic fork kit series FRK-BP.

All products with dedicated setting and spring rate, based on the driver weight.

HONDA CBR 1000 RR my 2017

For the new supersport bike CBR 1000 RR have been developed new specific products.

Multiadjustable rear shock – type M46R & M46K – equipped with Hydraulic spring preload (type: flex-standard or flex-knob).

Adjustable on Compression, Rebound and Spring Preload front fork kit: type F25SA (the newest innovative sealed hydraulic cartridge) & type F12R (standard hydraulic cartridge)

Also available the first step entry-level hydraulic fork kit series FRK-BP.

All products with dedicated setting and spring rate, based on the driver weight.

Suzuki GSX-S 750

Now available a range of products to improve handling and performance of the new sport naked GSX-S 750.

Multiadjustable rear shocks series M46R, M46K and M46KD.
All the shock series are proposed also equipped with hydraulic spring preload and, on demand, in the Shadow or Dark version.

Complete and multiadjustable hydraulic fork cartridge series F25SA & F12S (Compression, Rebound, Preload adjustments).
Also available the cheeper fork kits series FRK & FKS.
Dedicated setting and spring rates, based on the driver weight.

Honda X-ADV 750 2017

For the new X-ADV 750, the “Scooter-Enduro” of Honda, added on pricelist new specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better setup and performance.

Rear monoshock type M46KD, multiadjustable on Rebound, Length and Spring Preload (standard or hydralic type).

Front fork kit type FKS & FRK or the F12S kit, multi-adjustable hydraulic cartridge (Compression-Rebound-Preload).
No modification to the original fork is required to assemble the fork kits.

TRIUMPH Thruxton 1200R 2016

For the “timeless and legendary” cafe racer, added on pricelist specific products to customize and improve the handling and performance, with dedicated spring rates based on the driver weight.

The rear suspension twin set are adjustable on Compression, Rebound, Length and SpringPreload.
Two options: the base line M40D and the top line M40KC, all available in “Chromed” or “BlackEdition” version, to optimize the bike look.

For the front fork we developped an economic hydraulic kit (series FRK) and two options of full adjustable hydraulic cartridge kit: the standard F12R and the newest sealed F25SA that will allow a greater custom setting.
The fork kits are fully reversible and no modification to the original fork is required for assembly.

SUZUKI GSXR 1000 m.y. 17

For the new supersport bike GSXR 1000 have been developed new specific products.

Multiadjustable rear shock – type M46R & M46K – equipped with Standard or incorporated Hydraulic spring preload.

Front fork kit – type F25SA (the newest innovative sealed hydraulic cartridge) & type F12R (standard hydraulic cartridge) adjustable on Compression, Rebound and Spring Preload.
Also available the first step entry-level hydraulic fork kit series FRK-BP.

All products with dedicated setting and spring rate, based on the driver weight.

Triumph Street Scrambler 900 my 17

To customize setting and performance of the new Street Scrambler 900, now available specific line of products.

* Multiadjustable hydraulic rear twin-shocks, series  M40D and M40KC, available in Chrome and BlackEdition type.
* Fully adjustale hydraulic cartridge fork kit series F15K and (the cheeper) FKE and FSE fork spring kits, all ready to fit without any modification to the original fork.

Triumph Bonneville Bobber 17

For the new essential and minimalist custom, now available specific products for a better handling and comfort.

Rear shock series M40D available in the Black&Black, Black&Crome, Black&Orange options to optimize the bike look.

For the front, available the fork kit series FKE & FSE (spring set and preload adjustment) and the hydraulic cartridge kit series F15K to modify the conventional non-adjustable original fork in a fully-adjustable one, allowing a greater custom setting with dedicated spring rates, based on the driver weight.

The fork kits are fully reversible and no modification to the original fork is required for assembly.

APRILIA RS4 125 17

For the new “light” Aprilia sport bike developed specific products to improve performance and setup.
Multiadjustable hydraulic rear shocks type M46KD & M46KF, equipped with Standard or Hydraulic spring preload.
Multiadjustable hydraulic fork cartridge kit type F12S and the top racing level F25SA.
Dedicated setting and spring rates, based on the driver weight, are also available.

BMW R Nine T 1200 Racer 17

To optimize the setting and the performance of the vintage boxer R NineT Racer, now available specific suspension products:
* Multiadjustable hydraulic rear shocks, series  M46KD, M46K and M46R, also equipped with Hydraulic Spring Preload adjuster.
* Fully adjustale hydraulic cartridge fork kit series F15K and fork spring kit series FKE, all ready to fit without any modification to the original fork.
* Adjustable and “speed-sensitive” steering damper kits, series SDK & SDR for sport riders, to reduce shaking and provide greater safety at high speed.

Kawasaki Z900 17

For the new sport naked Z900, now available a range of products to improve handling and performance.
Multiadjustable rear shocks series M46R, M46K and M46KD.
The shocks are proposed also equipped with hydraulic spring preload and on demand, in the Shadow or Dark version.
Complete and multiadjustable hydraulic fork cartridge series F12S and the cheeper fork kits series FRK & FKS.
Dedicated setting and spring rates, based on the driver weight.

Kawasaki Z 650 2017

Kawasaki Z 650  m.y.2017
For the new Kawasaki naked bike, specific products to improve performance and handling now developed.
* Multi-adjustable rear shocks type M46KD, equipped with Standard or Hydraulic spring preload.
* Ready to fit front fork kits type FKE & FSE, also supplied with dedicated setting and spring rates, based on the driver weight.

BMW R Nine T 1200 Scrambler 2016

BMW R Nine T 1200 Scrambler my 2016
To customize setting and performance of the BMW vintage boxer R NineT Scrambler, now available specific line of products.

* Multiadjustable hydraulic rear shocks, series  M46KD,  M46K and M46R, also equipped with Hydraulic Spring Preload     adjuster.
* Fully adjustale hydraulic cartridge fork kit series F15K and (the cheeper) FKE fork spring kit, all ready to fit without any modification to the original fork.
* Adjustable and “speed-sensitive” steering damper kits, series SDK & SDR for sport riders, to reduce shaking and provide greater safety at high speed.

Also available the IKS knob-hydraulic spring preload to fit and up-grade the OEM rear shock.

Yamaha MT-09 my 17

Dedicated to the best seller “3-cylinders” MT-09 a full range of after-market products to customize and improve comfort & performance.
* the multiadjustable hydraulic rear shocks, type M46KD & M46KF, also equipped with Hydraulic Spring Preload adjuster.
* the fully adjustale hydraulic cartridge fork kit type F12S and the cheeper FKS & FRK fork spring & hydraulic kit. All with dedicated setting and spring rates.
* the range of steering kits, type SDK & SDR for sport riders, to reduce shaking of the front wheel and provide greater safety at high speed.

Yamaha MT-07 Tracer my17

For the new Tracer MT-07 twin-cylinder, available specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better setup and performance.
Rear monoshock – type M46KD – multiadjustable on Rebound, Length and SpringPreload (standard or hydralic type).
Front fork kit – type FKE & FSE (equipped with fork cap and spring preload adjuster) and the innovative F15K multi-adjustable hydraulic cartridge (Compression-Rebound-Preload). All the fork kits does not require any modification to the original fork.

Honda CRF 1000L AfricaTwin 16

Per la attesissima nuova AfricaTwin, sono ora disponibili specifici prodotti per migliorare assetto e precisione di guida.

Mono posteriore serie M46K-X, appositamente studiato, pluriregolabile in Compressione, Estensione, Interasse e Precarico Molla (flex-knob system).

Kit Forcella serie F12R-X, cartuccia idraulica completa, pluriregolabile in Compressione, Estensione e Precarico Molla).

Il kit forcella è totalmente reversibile e il montaggio non richiede nessuna modifica della forcella originale.

Ducati Scrambler 400 Sixty2 m.y.16

For the entry level Ducati Scranbler 400 Sixty2, now available specific products to improve handling and performance.

Rear shock type M46KD, multiadjustable in Rebound, Length and Spring Preload (standard & hydraulic system).

On demand, the rear shock is also available in “DarkSeries” (with black spring).

Fork kit type FKE (spring set + preload adj.) and type F15K (fully adjustable cartridge kit) with dedicated spring rates, based on the driver weight.

The fork kits are fully reversible and no modification to the original fork is required for assembly.

TRIUMPH Thruxton 1200 16

For the new “Modern Classic” cafe racer, Thruxton 1200, added on pricelist specific products to customize and improve the handling and comfort.

The rear suspension twin set are adjustable on Compression, Rebound, Length and Spring Preload.

The twin sets (series M40D & M40KC) are available in “Chromed” or “BlackEdition” version, to optimize the bike look.

For the front fork are available the fork kit series FKE & FSE (spring set and preload adjustment) & the “full adjustable” cartridge kit series F15K (Compression, Rebound, Spring Preload adjustment) to modify the conventional non-adjustable original fork in a fully-adjustable one, allowing a greater custom setting. Dedicated spring rates, based on the driver weight.

The fork kits are fully reversible and no modification to the original fork is required for assembly.

TRIUMPH StreetTwin 900 m.y.2016

Added on pricelist specific products to customize and improve the performance, handling and comfort of the “classic” Triumph StreetTwin 900.

Rear suspension set (Twin series M40D & M40KC) adjustable on Compression, Rebound, Length and SpringPreload.

The Twin range is available in “Chromed” or “BlackEdition” version, to optimize the bike look.

Fork kit series FKE & FSE (spring set and preload adjustment) and the “full adjustable” newest series F15K (Compression, Rebound, Spring Preload multiadjustable hydraulic cartridge) to modify the conventional non-adjustable Bonneville fork in a fully-adjustable fork, allowing a greater custom setting.

Dedicated setting and spring rates, based on the driver weight.

Ducati Monster 821 & 1200

For the new naked bikes of Ducati, Monster 821 & 1200, now available a full range of specific products to improve handling and performance.

Steering damper kits, Nitrogen gas pressurized, series SDK & SDR

Multiadjustable rear shocks, series M46KD

Fork kits seires FKS, FRK and full adjustable hydraulic cartridge serie F12S & F12R

Dedicated setting and spring rates, based on the driver weight.

Honda CBR 300 R 15

For the new “light” Honda sport bike have been developed specific products to improve performance and setup.

 

Rear shock – type M46KD & M46KF – multiadjustable hydraulic shocks equipped with Standard or Hydraulic spring preload

Front fork kit – type FKE and the new most innovative F15K hydraulic cartridge (multiadjustable on Compression-Rebound-Preload)

 

Dedicated setting and spring rates, based on the driver weight, are also available.

Honda CBR 650 F 14

For the CBR 650 F m.y.2014 are available specific performance products to improve handling and settingperformance and setup.

Rear shock – type M46KD – adjustable in Rebound, Length and Spring Preload (standard or hydraulic)

Front fork kit – type FKE & FSE – and also the new and most innovative F15K multi-adjustable hydraulic cartridge (Compression-Rebound-Preload)

Possibility of dedicated setting and spring rates, based on the driver weight

F15K

“From Conventional Non-Adjustable To Fully Adjustable Fork”

 

The F15K hydraulic fork cartridge kit completely replace all the existing fork internals to modify a conventional non-adjustable fork in a fully-adjustable fork, offering Spring Preload, Compression and Rebound damping adjustments, as in a sports fork type, allowing a greater custom setting.

 

The F15K fork kit is fully reversible.

No modification to the original fork is required to fit the fork kit.

Fork kit supplied with high-quality fork oil.

F25SA

The F25SA Sealed Hydraulic Fork kit fully replace all the existing original fork internals, transforming the original fork in a new damping system fully-adjustable on Spring Preload and on asymmetric functions of Compression and Rebound.

 

It allows a very high up-grade of the original fork:

.  improve the performance, increasing the damping coefficient

.  avoid the risk of fluid cavitation

.  offer greater and easy customization of the suspension set-up

.  decrease the weights, by using of light alloys for all the cartridge components

 

The F25SA fork kit is especially suitable for Sports and Racing use.

No modification to the original fork is required to fit the fork kit.

The kit is supplied ready to fit. The cartridge is delivered pre-assembled (sealed with the oil inside)

 

Dedicated setting and spring rates, based on the driver weight.

MG V9 Roamer & Bobber m.y.2016

To customize and improve the performance, handling and comfort of the awaited custom V9 of MG, “classic” Roamer and “aggressive” Bobber, now added on pricelist specific products.

 

Rear suspension set (Twin series M40D & M40KC) adjustable on Compression, Rebound, Length and SpringPreload.

The Twin range is available in “Chromed” or “BlackEdition” version, to optimize the bike look.

 

Fork kit series FKE (spring set and preload adjustment) and the “full adjustable” newest series F15K (Compression, Rebound, Spring Preload multiadjustable hydraulic cartridge) to modify the conventional non-adjustable V9 fork in a fully-adjustable fork, allowing a greater custom setting.

 

Dedicated setting and spring rates, based on the driver weight.

Triumph Bonneville T120 16

To customize and improve the performance, handling and comfort of the “classic” Triumph Bonneville T120, now added on pricelist specific products.

 

Rear suspension set (Twin series M40D & M40KC) adjustable on Compression, Rebound, Length and SpringPreload.

The Twin range is available in “Chromed” or “BlackEdition” version, to optimize the bike look.

 

Fork kit series FKE & FSE (spring set and preload adjustment) and the “full adjustable” newest series F15K (Compression, Rebound, Spring Preload multiadjustable hydraulic cartridge) to modify the conventional non-adjustable Bonneville fork in a fully-adjustable fork, allowing a greater custom setting.

 

Dedicated setting and spring rates, based on the driver weight.

Yamaha MT-03 m.y.2016

For the new 300cc Yamaha naked bike, have been developed specific products to improve performance and handling.

 

* Rear shocks type M46KD & M46KF, multi-adjustable hydraulic shocks, equipped with Standard or Hydraulic spring preload

 

* Front fork kits type FKE & FSE and also the latest and innovative F15K multi-adjustable hydraulic cartridge (Compression-Rebound-Preload)

 

Dedicated setting and spring rates, based on the driver weight, are also available.

Yamaha MT 07

For the new 700 twin-cylinder, available specific products with dedicated hydraulic setting and springs, based on the weight of the driver, for better setup and performance.

 

Rear monoshock – type M46KD – multiadjustable on Rebound, Length and SpringPreload (standard or hydralic type)

 

Front fork kit – type FKE & FSE (equipped with fork cap and spring preload adjuster) and the new and most innovative F15K multi-adjustable hydraulic cartridge (Compression-Rebound-Preload)

 

 

Yamaha MT-10 m.y.2016

For the new maxi naked MT-10, “the flagship” of the MT range,  now available specific products to improve handling and performance.

 

Rear shock series M46KD, M46K and M46R multiadjustable in the Compression, teh Rebound, the Length and the Spring Preload adjustments.

The spring preload is offered also in hydraulic version, with the latest IK (integrated-knob adjuster) model.

On demand, the monoshock is available also in Shadow and Dark Series.

 

Fork kit type FKS (spring kit) and F12R (complete hydraulic cartridge, multiadjustable in Compression, Rebound, Spring Preload).

 

Dedicated setting and spring rates, based on the driver weight.

T-Max 500 m.y.08/11 & T-Max 530 12/14

To customize and improve setting and ferformance of the maxiscooter T-Max 500 & 530 is available a full range of specific front fork kits and rear shocks.

 

* Front fork kit – type FKS, FKE, FSE and also the new and most innovative F15K multi-adjustable hydraulic cartridge (Compression-Rebound-Preload)

 

Dedicated setting and spring rates, based on the driver weight, are also available.

 

* Rear shocks, series M46KD & M46KF with adjustment of Compression, Rebound, Length and Spring Preload (also available hydraulic preload

 

Yamaha MT-09 m.y.2013 & MT-09 Tracer m.y.2015

Dedicated to the best seller “3-cylinders” MT-09 a full range of after-market products to customize and improve comfort & performance:

 

* the Multiadjustable hydraulic rear shocks, type M46KD & M46KF, equipped with Standard or Hydraulic Spring Preload adjuster)

* the Fork Spring & Hydraulic Kit type FKS or FRK & the fully adjustale hydraulic cartridge F12S with dedicated setting and springs

* the range of steering kits (type SDK & SDR) for sport riders, to reduce shaking of the front wheel and provide greater safety at high speed

Ducati Scrambler

Per la attesissima “Classica” di Ducati sono disponibili prodotti specifici per migliorare assetto e prestazioni.

Mono posteriore serie M46KD, pluriregolabile in Estensione, Interasse e Precarico Molla.
Il precarico molla è proposto anche in versione idrualica con il nuovissimo modello IK, appositamente pensato per la Scrambler 800.

Kit Forcella serie FKS (kit molle), FRK (kit valvole idrauliche e molle) e  F12S (cartuccia idraulica pluriregolabile in Compressione, Estensione e PrecaricoMolla).

Possibilità di tarature e molle dedicate in base al peso pilota.
Molla nera disponibile a richiesta.

Yamaha T-Max 530 m.y. 2015

To customize and improve setting and ferformance of the maxiscooter Yamaha T-Max 530 m.y.2015, is available a full range of specific rear shock, series M46KD & M46KF with adjustment of Compression, Rebound, Length and Spring Preload (also available hydraulic preload option) combined with a range of front fork kit, series FKS & FRK and also to the multiadjustable hydraulic cartridge series F12S.

Yamaha YZF R1

For the new Yamaha sport bike have been developed specific products.

Rear shock – type M46R & M46K – multi-adjustable and equipped with Standard or Hydraulic spring preload
Front fork kit – type F12R – multiadjustable hydraulic cartridge (Compression-Rebound-Spring preload)

Dedicated setting and spring rates, based on the driver weight, are also available.

Yamaha YZF R3

For the new “light” Yamaha sport bike have been developed specific products to improve performance and setup.
Rear shock – type M46KD & M46KF – multi-adjustable and equipped with Standard or Hydraulic spring preload
Front fork kit – type FKE & FSE – and also the newest F15K hydraulic cartridge, multiadjustable in Compression-Rebound-Preload
Dedicated setting and spring rates, based on the driver weight, are also available.

KTM RC 390 15

To improve performance and set-up on the new KTM entry level sport bike, now available specific products.

Rear shock type M46KD & M46KF, multiadjustable and equipped with Standard or Hydraulic spring preload
Front fork kit type FRK (valve and spring kit) & F12S multiadjustable hydraulic cartridge (adj. Compression, Rebound, SpringPreload)

Dedicated setting and spring rates, based on the driver weight, are also available.

This site uses cookies. Confirming the acceptance of the consent to the use of cookies in accordance with the new provisions of the GDPR 2016/679 on the protection of individuals.
If you want to learn more or opt out of all or some cookies, see the privacy settings