Share: 0
Categories: , .




The fork kit F15K sets a new standard and quality level on
the market.
Hydraulic fork cartridge kit that completely replace all the existing fork internals.
It allows to modify a conventional non-adjustable fork in a fully-adjustable fork, offering Spring Preload and separate functions of Compression and Rebound asymmetric adjustments, as in a sports fork type, for a greater custom setting.
The F15K can be set-up much more accurately for each rider, making the fork more precise, more adjustable, more easier to use … better in every regard.

Fork cartridge cylinder D.20 mm in Alu alloy, with lapping and oxidation surface treatment.
Pumping rod D.12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment.
Set of Compression and Rebound D.20 mm valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims stack for a total hydraulic flows control.
Anti-cavitation valve sets.
All internal and external Aluminium components are supplied with anodizing surface treatment.
The fork kit is fully reversible.
No modification to the original fork is required for assembly
the fork kit and is completely overhauled for a proper and regular maintenance.
Fork kit supplied with specific fluid (Motorex Fork Oil).

Matris_fork-cartridge-kit-F15K_zoom2 Matris_fork-cartridge-kit-F15K_zoom1 Adjustments
Spring preload unit, with specific reference marks.
Rebound unit with specific clicks.
Compression unit with specific clicks.

Set of linear spring in Si-Cr alloy Steel, available in different rates, specific for the different bike models and the driver weigth, for a total custom.

This site uses cookies. Confirming the acceptance of the consent to the use of cookies in accordance with the new provisions of the GDPR 2016/679 on the protection of individuals.
If you want to learn more or opt out of all or some cookies, see the privacy settings